Prof. Dr. Norani Muti Binti Mohamed

Bootstrap Image Preview


Universiti Teknologi PETRONAS, Department of Fundamental & Applied Sciences


Office Address
20-03-015 / Block P
Universiti Teknologi PETRONAS
Bandar Seri Iskandar
32610
Perak, Malaysia.
Contact
Phone: +60 5-368 7661 / 8220
Email: noranimuti_mohamed@utp.edu.my

Profile

PhD.in Physics by University of Essex, England
MSc.in Physics by University of Essex, England
BSc.in Physics by University of Essex, England


She is a professor at the Department of Fundamental & Applied Sciences at Universiti Teknologi PETRONAS (UTP). Currently she is holding the position as a Director for UTP Centre of Innovative Nanostructures & Nanodevices (COINN). She obtained her BSc, MSc and PhD in Physics from University of Essex, UK. She specializes in the area of Thin Film Technology, Semiconductor Technology and Nanotechnology. She established Centre of Innovative Nanostructures and Nanodevices (COINN) at UTP with the objective of establishing a library of nanomaterials and synthesis techniques for accelerated production of innovative and beneficial commercialized products. In 2011, COINN had been recognized as NanoMalaysia Centre of Excellence based on its continuous effort on R&D on nanotechnology, focusing on alternative and renewable energy. Research works undertaken are very much focused on cutting-edge research areas ranging from novel materials with innovative nanostructures to novel nanodevices. She has published over 200 research papers with some of her achievements been awarded medals at various local and international exhibitions. About RM25 million in research funding has been secured with accomplishment of more than 10 research grants as principle investigator. She is also actively involved in International Organization of Standardization in Nanotechnologies (ISO/TC229) as the technical expert and as chairperson of working group 2 (measurement and characterization) in Malaysia. At international level, she is a Programme Management Board member of Lloyds Register Foundation International Consortium of Nanotechnologies (LRF-ICON) which is based in Southampton, UK. Nationally, she is the fellow of the Academy of Sciences Malaysia (ASM) and the project leader in NanoMalaysia Institute for Innovative Technology (NanoMITe) Global Research Consortium.

Area of Expertise:

1) Nanotechnology, Nanomaterials
2) Thin Film Technology
3) Semiconductor Technology
4) Metal-Oxide Coatings,
5) Lasers & Their Applications

Publication:

2019

Murthe, Satisvar Sundera and Saheed, Mohamed Shuaib Mohamed and Perumal, Veeradasan and Saheed, Mohamed Salleh Mohamed and Mohamed, Norani Muti (2019) 11 - Electrospun Nanofibers for Biosensing Applications. 253 - 267.

Perumal, Veeradasan and Mohamed, Norani Muti and Saheed, Mohamed Salleh Mohamed and Saheed, Mohamed Shuaib Mohamed (2019) 10 - Microtechnology and Nanotechnology Advancements Toward Bio-Molecular Targeting. 225 - 251.

Zaine, Siti Nur Azella and Mohamed, Norani Muti and Khatani, Mehboob and Samsudin, Adel Eskandar and Shahid, Muhammad Umair (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19 . 220 - 229.

Mohamed, Norani Muti (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO2 nanorod decorated with reduced graphene oxide. DIAMOND AND RELATED MATERIALS, 94 . ISSN 0925-9635

Mohamed, Norani Muti (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells, 94 .

Mohamed, Norani Muti (2019) Life Cycle Assessment of Dye Sensitized Solar Cell in Malaysia. JURNAL KEJURUTERAAN, 31 (1). ISSN 0128-0198




2018

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85 . pp. 5-12.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. IOP Conference Series: Materials Science and Engineering, 348 (1).

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116 . pp. 116-122.

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211 . pp. 13-16.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

2017

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Dye solar cell design parameter optimization using Silvaco ATHENA and ATLAS. International Conference on Intelligent and Advanced Systems, ICIAS 2016

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Applications of Taguchi method for optimization of dye solar cell design. Sains Malaysiana, 46 (3). pp. 503-508.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2017) Template-assisted growth of highly oriented 3D graphene pH sensor towards new avenues for biosensor. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 50-53.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Perumal, V. and Saheed, M.S.M. (2017) DC magnetron sputtered TiO2 thin film as efficient hole blocking layer for perovskite solar cell. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 46-49.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2017) Precursor and pressure dependent 3D graphene: A study on layer formation and type of carbon material. Diamond and Related Materials, 79 . pp. 93-101.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. AIP Conference Proceedings, 1901 .

Yahya, W.Z.N. and Meng, W.T. and Khatani, M. and Samsudin, A.E. and Mohamed, N.M. (2017) Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells. E-Polymers, 17 (5). pp. 355-361.

Ali Samer Muhsan, Norani M Mohamed, Usman Siddiqui, Muhammad U S (2017) Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control. Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. (2017) Enhancing photoelectrochemical hydrogen production over Cu and Ni doped titania thin film: Effect of calcination duration. Journal of Environmental Chemical Engineering, 5 (4). pp. 3207-3214.

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.